Acquired enamel pellicle and biofilm engineering with a combination of acid-resistant proteins (CaneCPI-5, StN15, and Hemoglobin) for enhanced protection against dental caries - in vivo and in vitro investigations.

OBJECTIVE: This study was designed in two-legs. In the in vivo, we explored the potential of a rinse solution containing a combination (Comb) of 0.1 mg/mL CaneCPI-5 (sugarcane-derive cystatin), 1.88 × 10- 5M StN15 (statherin-derived peptide) and 1.0 mg/mL hemoglobin (Hb) to change the protein profile of the acquired enamel pellicle(AEP) and the microbiome of the enamel biofilm. The in vitro, was designed to reveal the effects of Comb on the viability and bacterial composition of the microcosm biofilm, as well as on enamel demineralization. MATERIALS AND METHODS: In vivo study, 10 participants rinsed (10mL,1 min) with either deionized water (H2O-control) or Comb. AEP and biofilm were collected after 2 and 3 h, respectively, after rinsing. AEP samples underwent proteomics analysis, while biofilm microbiome was assessed via 16 S-rRNA Next Generation Sequencing(NGS). In vitro study, a microcosm biofilm protocol was employed. Ninety-six enamel specimens were treated with: 1)Phosphate-Buffered Solution-PBS(negative-control), 2)0.12%Chlorhexidine, 3)500ppmNaF and 4)Comb. Resazurin, colony-forming-units(CFU) and Transversal Microradiography(TMR) were performed. RESULTS: The proteomic results revealed higher quantity of proteins in the Comb compared to control associated with immune system response and oral microbial adhesion. Microbiome showed a significant increase in bacteria linked to a healthy microbiota, in the Comb group. In the in vitro study, Comb group was only efficient in reducing mineral-loss and lesion-depth compared to the PBS. CONCLUSIONS: The AEP modification altered the subsequent layers, affecting the initial process of bacterial adhesion of pathogenic and commensal bacteria, as well as enamel demineralization. CLINICAL RELEVANCE: Comb group shows promise in shaping oral health by potentially introducing innovative approaches to prevent enamel demineralization and deter tooth decay.

Treatment of an Infrabony Defect of a Maxillary Canine Tooth Using Enamel Matrix Derivatives with Allogeneic Bone Augmentation in a Dog.

A 5-year-old Miniature Dachshund was presented having an infrabony pocket on the palatal aspect of the right maxillary canine tooth. The bony defect had worsened despite previous closed root planing and administration of a perioceutic agent. A second surgery using an allogeneic cancellous bone augmentation with an enamel matrix derivative was performed in the infrabony defect following open root planing. Eight months after the periodontal surgery, the osseous defect showed healing by improved periodontal probing measurements and increased radiopacity using dental radiography and computed tomography.

Ingenious Architecture and Coloration Generation in Enamel of Rodent Teeth.

Teeth exemplify architectures comprising an interplay of inorganic and organic constituents, resulting in sophisticated natural composites. Rodents (Rodentia) showcase extraordinary adaptations, with their continuously growing incisors surpassing human teeth in functional and structural optimizations. In this study, employing state-of-the-art direct atomic-scale imaging and nanoscale spectroscopies, we present compelling evidence that the release of material from ameloblasts and the subsequent formation of iron-rich enamel and surface layers in the constantly growing incisors of rodents are complex orchestrated processes, intricately regulated and independent of environmental factors. The synergistic fusion of three-dimensional tomography and imaging techniques of etched rodent́s enamel unveils a direct correlation between the presence of pockets infused with ferrihydrite-like material and the acid resistant properties exhibited by the iron-rich enamel, fortifying it as an efficient protective shield. Moreover, observations using optical microscopy shed light on the role of iron-rich enamel as a microstructural element that acts as a path for color transmission, although the native color remains indistinguishable from that of regular enamel, challenging the prevailing paradigms. The redefinition of "pigmented enamel" to encompass ferrihydrite-like infusion in rodent incisors reshapes our perception of incisor microstructure and color generation. The functional significance of acid-resistant iron-rich enamel and the understanding of the underlying coloration mechanism in rodent incisors have far-reaching implications for human health, development of potentially groundbreaking dental materials, and restorative dentistry. These findings enable the creation of an entirely different class of dental biomaterials with enhanced properties, inspired by the ingenious designs found in nature.

Incidence, severity, and risk factors for white spot lesions in adolescent patients treated with clear aligners.

OBJECTIVES: This study was aimed to clarify the incidence, severity, and clinical risk factors for white spot lesions (WSLs) in adolescent patients treated with clear aligners. METHODS: Pre-treatment and post-treatment intraoral photographs of 203 adolescent patients undergoing clear aligner therapy were retrospectively evaluated to assess the occurrence and severity of WSLs. Information on patients' general oral condition and orthodontic treatment was collected from clinical medical documents, retrospective questionnaires, and ClinCheck® software. Independent risk factors and model performance were determined by multivariate logistic regression and receiver operating characteristic curve analysis. RESULTS: Thirty-five percent of adolescent patients developed WSLs during clear aligner treatment. Logistic regression analysis revealed that the presence of WSLs before treatment (OR 2.484, 95% CI 1.245-4.957), frequency of drinking carbonated beverages (OR 1.508, 95% CI 1.045-2.177), and number of anterior attachments (OR 2.192, 95% CI 1.502-3.198) were risk factors for the occurrence of WSLs in adolescent patients treated with clear aligners (P < .05), whereas the number of times they brushed each day (OR 0.656, 95% CI 0.454-0.947) and frequency of aligner cleaning after eating while wearing them (OR 0.611, 95% CI 0.433-0.861) were protective factors against WSLs (P < .05). CONCLUSIONS: The incidence of WSLs was high in adolescent patients treated with clear aligners. Few brushings each day, pre-treatment WSLs, a high frequency of drinking carbonated beverages, a low frequency of aligner cleaning after eating while wearing them, and a high number of anterior attachments are strongly associated with the development of WSLs in adolescent patients treated with clear aligners.

The effects of re-irradiation on the chemical and morphological properties of permanent teeth.

This study aimed to assess the in vitro effects of re-irradiation on enamel and dentin properties, simulating head and neck cancer radiotherapy retreatment. Forty-five human permanent molars were classified into five groups: non-irradiated; irradiated 60 Gy, and re-irradiated with doses of 30, 40, and 50 Gy. Raman spectroscopy, scanning electron microscopy (SEM), and energy dispersive x-ray spectroscopy (EDS) were employed for analysis. Raman spectroscopy assessed intensity, spectral area, and specific peaks comparatively. Statistical analysis involved Kolmogorov-Smirnov and One-Way ANOVA tests, with Tukey's post-test (significance level set at 5%). Significant changes in irradiated, non-irradiated, and re-irradiated enamel peaks were observed, including phosphate (438 nm), hydroxyapatite (582 nm), phosphate (960 nm), and carbonate (1070 nm) (p < 0.05). Re-irradiation affected the entire tooth (p > 0.05), leading to interprismatic region degradation, enamel prism destruction, and hydroxyapatite crystal damage. Dentin exhibited tubule obliteration, crack formation, and progressive collagen fiber fragmentation. EDX revealed increased oxygen percentage and decreased phosphorus and calcium post-reirradiation. It is concluded that chemical and morphological changes in irradiated permanent teeth were dose-dependent, exacerbated by re-irradiation, causing substantial damage in enamel and dentin.

Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive.

OBJECTIVES: The objective of this study was to synthesize arginine loaded mesoporous silica nanoparticles (Arg@MSNs), develop a novel orthodontic adhesive using Arg@MSNs as modifiers, and investigate the adhesive performance, antibacterial activity, and biocompatibility. METHODS: Arg@MSNs were synthesized by immobilizing arginine into MSNs and characterized using transmission electron microscope (TEM), dynamic light scattering (DLS), and Fourier Transform Infrared Spectrometer (FT-IR). Arg@MSNs were incorporated into Transbond XT adhesive with different mass fraction to form functional adhesives. The degree of conversion (DC), arginine release behavior, adhesive performance, antibacterial activity against Streptococcus mutans biofilm, and cytotoxicity were comprehensively evaluated. RESULTS: TEM, DLS, and FT-IR characterizations confirmed the successful preparation of Arg@MSNs. The incorporation of Arg@MSNs did not significantly affect DC and exhibited clinically acceptable bonding strength. Compared to the commercial control, the Arg@MSNs modified adhesives greatly suppressed the metabolic activity and polysaccharide production while increased the biofilm pH values. The cell counting kit (CCK)-8 test indicated no cytotoxicity. CONCLUSIONS: The novel orthodontic adhesive containing Arg@MSNs exhibited significantly enhanced antibacterial activities and inhibitory effects on acid production compared to the commercial adhesive without compromising their bonding strength or biocompatibility. CLINICAL SIGNIFICANCE: The novel orthodontic adhesive containing Arg@MSNs exhibits potential clinical benefits in preventing demineralization of enamel surfaces around or beneath orthodontic brackets due to its enhanced antibacterial activities and acid-producing inhibitory effects.

Optical penetration models for practical prediction of femtosecond laser ablation of dental hard tissue.

OBJECTIVES: To develop and practically test high-precision femtosecond laser ablation models for dental hard tissue that are useful for detailed planning of automated laser dental restorative treatment. METHODS: Analytical models are proposed, derived, and demonstrated for practical calculation of ablation rates, ablation efficiency and ablated morphology of human dental enamel and dentin using femtosecond lasers. The models assume an effective optical attenuation coefficient for the irradiated material. To achieve ablation, it is necessary for the local energy density of the attenuated pulse in the hard tissue to surpass a predefined threshold that signifies the minimum energy density required for material ionization. A 1029 nm, 40 W carbide 275 fs laser was used to ablate sliced adult human teeth and generate the data necessary for testing the models. The volume of material removed, and the shape of the ablated channel were measured using optical profilometry. RESULTS: The models fit with the measured ablation efficiency curve against laser fluence for both enamel and dentin, correctly capturing the fluence for optimum ablation and the volume of ablated material per pulse. The detailed shapes of a 400-micrometer wide channel and a single-pulse width channel are accurately predicted using the superposition of the analytical result for a single pulse. CONCLUSIONS: The findings have value for planning automated dental restorative treatment using femtosecond lasers. The measurements and analysis give estimates of the optical properties of enamel and dentin irradiated with an infrared femtosecond laser at above-threshold fluence and the proposed models give insight into the physics of femtosecond laser processing of dental hard tissue.

Orthodontic treatment of a patient with dentinogenesis imperfecta using a clear aligner system.

BACKGROUND: Orthodontic treatment for patients with dentinogenesis imperfecta (DGI) can be risky because of the fragility of their dental hard tissue. Although the Invisalign (Align Technology) clear aligner system should be a suitable orthodontic appliance for patients with DGI, to the authors' knowledge, there has been no related research. CASE DESCRIPTION: A 28-year-old woman with DGI sought treatment with a 1 mm open bite, edge-to-edge occlusion of the central incisors, and a bilateral Class III cusp-to-cusp molar relationship. Invisalign was applied for her treatment, and after 3 and one-half years of orthodontic therapy, a normal overjet and overbite were achieved, accompanied by retraction of the lower lip as well as a bilateral Class I molar relationship. In addition, there was no iatrogenic injury to the patient's teeth. PRACTICAL IMPLICATIONS: The Invisalign system may be a suitable orthodontic appliance for patients with DGI because clear aligners lessen the tensile stress to the teeth, decrease the number and area of bonds to the teeth, and offer protective effects through a full wrap of plastic that covers the crowns of the teeth.

The prevalence of developmental defects of enamel in people with cystic fibrosis: a systematic review.

BACKGROUND: Oral health impacts systemic health, individual well-being, and quality of life. It is important to identify conditions that may exacerbate oral disease to aid public health and policy development and promote targeted patient treatment strategies. Developmental defects can increase an individual's risk of dental caries, hypersensitivity, premature tooth wear, erosion, and poor aesthetics. As part of an ongoing study assessing oral health in adults with cystic fibrosis at Cork University Dental School and Hospital, a systematic review of available literature was conducted to assess the prevalence of enamel defects in people with cystic fibrosis. AIMS: To critically evaluate the literature to determine if the prevalence of developmental defects of enamel is higher in people with cystic fibrosis (PwCF). METHODS: Data Sources: Three online databases were searched Embase, Scopus, and Web of Science Core Collection. Studies that examined an association between cystic fibrosis and developmental defects of enamel were included in this systematic review. RESULTS: The initial search identified 116 publications from the following databases Embase, Web of Science Core Collection, and Scopus. Eleven studies were included for qualitative analysis. Nine studies concluded that PwCF had a higher prevalence of enamel defects than control people and one study found no difference in cystic fibrosis (CF) status. All studies had a risk of bias that may influence study results and their interpretation. CONCLUSIONS: The results of the systematic review show a consistent pattern that PwCF have a higher prevalence of DDE than people without CF. Genetic dysfunction, chronic systemic infections, and long-term antibiotic use are possible aetiological causes. This review highlights the need for future studies to investigate if DDEs are caused by the underlying CFTR mutation or as a consequence of disease manifestations and/or management.

Biometric analysis of furcation area of molar teeth and its relationship with instrumentation.

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

Clinical and ex-vivo effect of LASERs on prevention of early-enamel caries: systematic review & meta-analyses.

To investigate the in vivo and in situ effect of different types of lasers in prevention of enamel demineralization in high caries risk cases (around orthodontic brackets, around restoration and in caries susceptible pits and fissures). PubMed was searched using the following keyword sequence; (Laser therapy OR laser irradiation OR laser application) AND (enamel caries prevention OR enamel demineralization OR enamel remineralization OR early enamel caries OR early-enamel caries OR enamel resistance OR enamel decalcification OR white spot lesions WSLs OR incipient lesion OR enamel decay OR enamel Dissolution OR enamel microhardness) AND (clinical trial OR Randomized clinical trial OR In situ study). The latest literature search was ended by "30 January 2023". PubMed was used as a primary data base for study selection. Scopus, EBSCO, and Google scholar are checked in our study after results of systematic search on PubMed. Only duplicates were found. Two meta-analyses were carried out. The first, clinical meta-analysis on incidence of white spot lesions (WSLs) following CO2 laser irradiation of enamel. The second meta-analysis on ex-vivo/in situ effect of CO2 laser on microhardness of enamel. In each meta-analysis three studies were included. Risk of bias was assessed. The search identified eight studies (four ex-vivo and four clinical trials). Regarding the clinical meta-analysis, the overall standardized mean difference was 0.21 [ 95% confidence interval (CI): 0.15-0.30, p < 0.00001]. This indicates that the incidence of new WSLs in patients who received low power CO2 laser treatment was highly significantly lower than placebo groups. The heterogeneity was considerable (I2 = 71%). In the second meta-analysis, the overall standardized mean difference was 49.55 [ 95% confidence interval (CI): 37.74, 61.37, p < 0.00001]. This indicates that microhardness of enamel receiving low power (0.4-5 W) CO2 laser irradiation is highly significantly lower than control untreated enamel. The heterogeneity was substantial (I2 = 48%). Within the limitations of this study, Low level laser therapy concept with CO2 laser seems to be effective in preventing enamel caries.Prospero registration number: CRD42023437379.

The Role of Interproximal Reduction (IPR) in Clear Aligner Therapy: A Critical Analysis of Indications, Techniques, and Outcomes.

Interproximal reduction (IPR) has become a standard practice in orthodontic treatment, particularly in the clear aligner therapy. It became an integral part of the digital plan when using clear aligners. Given the irreversible nature of IPR, precise planning and performance is essential. This article aims to analyze and summarize the existing literature on IPR in the context of clear aligners. The goal is to help clinicians to gain essential knowledge for safely and effectively navigating IPR. The review critically examines different perspectives found in the literature, covering indications, methods, and outcomes. Topics exploring the impact of IPR on treatment outcomes include space gaining, addressing tooth size discrepancies, tooth shape adjustments, resolving malocclusion, and enhancing aesthetics. Emphasizing precision of the procedure by the clinician and awareness of contraindications, the article also discusses the impact of IPR on patients. This includes considerations like increased pulp temperature, susceptibility to cavities due to changes in enamel roughness, effects on soft tissues, and post-IPR tooth sensitivity.

Celiac Disease-Related Enamel Defects: A Systematic Review.

INTRODUCTION: This systematic review aims to elucidate the intricate correlation between celiac disease (CD) and dental enamel defects (DED), exploring pathophysiological mechanisms, oral health implications, and a dentist's role in early diagnosis. MATERIALS AND METHODS: Following PRISMA guidelines, a comprehensive search from 1 January 2013 to 1 January 2024 across PubMed, Cochrane Library, Scopus, and Web of Science identified 153 publications. After exclusions, 18 studies met the inclusion criteria for qualitative analysis. Inclusion criteria involved study types (RCTs, RCCTs, case series), human participants, English language, and full-text available. RESULTS: The search yielded 153 publications, with 18 studies meeting the inclusion criteria for qualitative analysis. Notable findings include a high prevalence of DED in CD patients, ranging from 50 to 94.1%. Symmetrical and chronological defects, according to Aine's classification, were predominant, and significant associations were observed between CD severity and enamel defect extent. CONCLUSIONS: The early recognition of oral lesions, particularly through Aine's classification, may signal potential CD even in the absence of gastrointestinal symptoms. Correlations between CD and dental health conditions like molar incisor hypomineralization (MIH) emphasize the dentist's crucial role in early diagnosis. Collaboration between dentists and gastroenterologists is essential for effective monitoring and management. This review consolidates current knowledge, laying the groundwork for future research and promoting interdisciplinary collaboration for improved CD-related oral health outcomes. Further large-scale prospective research is recommended to deepen our understanding of these issues.

Influence of maternal cholesterol-enriched diet on chemical composition of teeth enamel in offspring of mice.

OBJECTIVE: Aim: To determine the chemical composition of the tooth enamel of two-day-old mice from hypercholesterolemic mothers by energy dispersive X-ray spectroscopy. PATIENTS AND METHODS: Materials and Methods: Forty mature female mice were randomly assigned (n = 20/group) to either a standard chow vivarium diet (control group) or a cholesterol-enriched chow diet (experimental group). After fertilization, pregnancy and birth, on postnatal day 2, the incisor segments of 6 pups form each group were used for energy dispersive X-ray spectroscopy. RESULTS: Results: Influence of maternal hypercholesterolemic diet on tooth development and mineralization was examined, which revealed changes in enamel chemical composition. First, the results indicate the presence of seven elements (Na, Cl, Ca, P, Mg, S, Fe) in the enamel of both the hypercholesterolemic and normal offspring, but the content of element Ca2+ decreased, the content of elements P5+, Na+, Cl- tended to increase in pups from hypercholesterolemic mice. Second, the initial level of mineralization according to the atomic (%) Ca / P in hypercholesterolemic pups ratio was 1.26, comparing with normal pups where level of mineralization was 1.34. Taking into account that irreversible changes in the structure of the enamel were observed when the Ca / P ratio was below 1.33, we can suggest that the eruption of teeth with an imperfect structure could be because of maternal hypercholesterolemic diet. CONCLUSION: Conclusions: Results of this study suggest that hypercholesterolemic diet during gestation and lactation leads to altered enamel mineralization in mice because of changes in chemical composition and may link to the early childhood caries.

Whitening Efficacy of Toothpastes on Coffee-Stained Teeth: An Enamel Surface Analysis.

AIM: This study aimed to identify the optimal toothpaste for removing coffee-induced stains while also evaluating its impact on tooth enamel through roughness and abraded depth parameters, providing a comprehensive understanding of their effects. MATERIALS AND METHODS: Three whitening toothpastes and 2 conventional toothpastes were prepared for a simulated brushing procedure on coffee-stained bovine enamel tooth specimens. Using a toothbrushing machine, up to 10,000 brushstrokes were completed, while spectrophotometric readings were taken at designated intervals. A mixed-effects model for statistical analysis determined the effects of toothpaste and brushing on colour change, roughness, and abraded depth. RESULTS: Whitening toothpastes significantly deviated from the control (P < .001, P < .001, and P < .003, respectively), whereas the conventional toothpaste did not exhibit a significant contrast (P < .081). Regarding colour restoration following coffee staining, whitening toothpastes showed higher restoration than conventional toothpastes. Surface roughness and abraded depth parameters increased with accumulated brushing. CONCLUSIONS: Sodium hexametaphosphate-containing toothpaste demonstrated the highest efficacy in removing coffee-induced stains and restoring tooth colour. Nevertheless, this stronger whitening effect was associated with increased abrasion. While conventional toothpastes exhibited some whitening effects, the most substantial improvement in lightness was consistently observed with whitening toothpastes. CLINICAL RELEVANCE: Understanding how whitening toothpaste affects enamel integrity is crucial for refining formulations and advancing dental care. This knowledge lays the groundwork for more effective oral care products and improved whitening procedures, ultimately enhancing the overall quality of dental treatments.

The Effect of Food Polymers (Pectin, Alginate, and Gum Arabic) on Carbonated Drink-Induced Enamel Demineralization: An In Vitro Study.

INTRODUCTION: The increased use of soft drinks leads to a high prevalence of dental erosion (DE), and the use of polymers can decrease tooth demineralization by a carbonated drink. Assessment of the effect of food-approved polymers such as highly esterified pectin (HP), propylene glycol alginate (PGA), and gum arabic (GA) on their efficiency to reduce enamel demineralization on addition with a commercially available carbonated drink was the main objective of this study. MATERIALS AND METHODS: For this study, 300 premolar teeth were studied for enamel erosion and were divided into five groups consisting of 60 samples in each group. The teeth treated with distilled water had negative control, a commercially available carbonated drink with pH 2.7 had positive control, and food polymers were added individually to the carbonated drink in a specified quantity with minimal pH change and were taken as groups A, B, and C, respectively. The enamel erosion that occurred in study groups was measured using a laser fluorescence spectroscopic system with laser excitation at 404 nm at different treatment times (30, 60, and 120 seconds).  Results: Demineralization was less in samples treated with polymer added to carbonated drink solutions compared to samples exposed to plain carbonated drink. As the time of exposure increased up to 120 seconds, a significant decrease in demineralization occurred in polymer-treated groups of samples as against plain carbonated drink with HP showing more decreased demineralization with extended exposure periods compared to other polymers. The surface morphology of tooth samples exhibited the anti-erosive effect of polymers, and the scanning electron microscopic pictures revealed a smoother surface for the polymer-added group. CONCLUSION: This study shows the efficacy of HP, PGA, and GA on reducing the effect of carbonated drink-induced enamel demineralization, and these polymers' addition to drinks can be an innovative way to reduce the demineralization potential of carbonated acidic drinks.

Bonding to Fluorosed Teeth: A Review of the Literature.

Excessive fluoride availability during tooth formation can cause structural alterations in enamel and dentin. These alterations may negatively impact the adhesion of various dental materials to teeth with dental fluorosis. The aim of this review of literature is to identify updates in bonding to fluorosed teeth and summarize relevant recommendations. Findings from the available literature suggest that bonding procedures may be carried out reliably on most fluorosed teeth with consideration to the severity of fluorosis and the employment of additional bond-enhancing measures for the severely involved teeth.

Unconventional dental implant placement through an impacted maxillary central incisor in stable contact with enamel and dentin: A Case Report.

When edentulism is accompanied by an impacted tooth, conventional treatment usually involves traumatic tooth extraction, which would inevitably destroy the surrounding alveolar bone and cause unfavorable aesthetics, especially for anterior teeth. Recently, implant placement through the impacted tooth or residual root has been proposed as an alternative to invasive extraction. A particular type of integration has been observed between dentin/cementum and titanium implant, while enamel-implant contact has not been reported. In this paper, an implant was placed through the impacted maxillary central incisor, thereby avoiding an invasive extraction surgery. The buccal section of the tooth, including crown enamel, was retained in situ for buccal alveolar ridge preservation. The follow-up results were satisfactory, and a stable enamel-implant contact was observed. Combining with previous similar studies, this technique opens intriguing possibilities and brings fresh insight for the concept of dentointegration. More histological and clinical studies with long-term follow-up are warranted before endorsing this technique in routine application.

In vitro effect of fluoride gels supplemented with nano-sized sodium trimetaphosphate on enamel erosive wear.

OBJECTIVE: To assess the protective effect of fluoride (F) gels supplemented with micrometric or nano-sized sodium trimetaphosphate (TMPmicro and TMPnano, respectively) against enamel erosion in vitro. METHODS: Bovine enamel blocks (n=140) were selected according to their surface hardness, and randomly divided into seven groups (n=20/group), according to the gels tested: Placebo (without F/TMP), 4,500 µg F/g (4500F), 9,000 µg F/g (9000F), 4500F plus 2.5% TMPnano (2.5% Nano), 4500F plus 5% TMPnano (5% Nano), 4500F plus 5% TMPnano (Micro 5%) and 12,300 µg F/g (Acid gel). Blocks were treated once during one minute with the gels, and submitted to erosive (ERO, n=10/group) or erosive plus abrasive (ERO+ABR, n=10/group) challenges 4 times/day, for 90 seconds for each challenge (under reciprocating agitation), during consecutive 5 days. Blocks were analyzed by profilometry, and by surface (SH) and cross-sectional hardness (∆KHN). Data were submitted to two-way ANOVA, and Fisher's LSD test (p<0.05). RESULTS: For ERO, both TMPnano-containing gels promoted enamel wear significantly lower than Placebo and 4500F, reaching levels similar to both positive controls (9000F and acid gel); significantly lower softening was observed for enamel treated with 4500F+5% Micro and 4500F+2.5% Nano. Also, the lowest ∆KHN values were observed for 4500F+2.5% TMPnano among the TMP-containing gels. For ERO+ABR, the lowest enamel wear was achieved by the use of 4500F+5% Nano among all gels, including both positive controls; lower softening was observed for Placebo and 9000F groups. CONCLUSION: The addition of 5% nano-sized TMP to a low-fluoride gel produced superior protective effects for enamel under both challenges conditions, when compared with micrometric TMP, reaching values similar to or superior than both positive controls, respectively for ERO and ERO+ABR. CLINICAL SIGNIFICANCE: The supplementation of low-F gels with TMP was shown to significantly improve their effects on enamel erosive wear, and the use of nano-sized TMP further enhances this protective action.

S100a6 knockdown promotes the differentiation of dental epithelial cells toward the epidermal lineage instead of the odontogenic lineage.

Tooth development is a complex process involving various signaling pathways and genes. Recent findings suggest that ion channels and transporters, including the S100 family of calcium-binding proteins, may be involved in tooth formation. However, our knowledge in this regard is limited. Therefore, this study aimed to investigate the expression of S100 family members and their functions during tooth formation. Tooth germs were extracted from the embryonic and post-natal mice and the expression of S100a6 was examined. Additionally, the effects of S100a6 knockdown and calcium treatment on S100a6 expression and the proliferation of SF2 cells were examined. Microarrays and single-cell RNA-sequencing indicated that S100a6 was highly expressed in ameloblasts. Immunostaining of mouse tooth germs showed that S100a6 was expressed in ameloblasts but not in the undifferentiated dental epithelium. Additionally, S100a6 was localized to the calcification-forming side in enamel-forming ameloblasts. Moreover, siRNA-mediated S100a6 knockdown in ameloblasts reduced intracellular calcium concentration and the expression of ameloblast marker genes, indicating that S100a6 is associated with ameloblast differentiation. Furthermore, S100a6 knockdown inhibited the ERK/PI3K signaling pathway, suppressed ameloblast proliferation, and promoted the differentiation of the dental epithelium toward epidermal lineage. Conclusively, S100a6 knockdown in the dental epithelium suppresses cell proliferation via calcium and intracellular signaling and promotes differentiation of the dental epithelium toward the epidermal lineage.